This package is designed for vehicles needing moderate paint correction, addressing approximately 70% to 80% of existing defects such as swirl marks and marring. The objective is to minimize as many imperfections as possible in a single step, while restoring gloss and clarity to the paint.
Softer paints, like those on Japanese vehicles, tend to see a higher reduction in defects, whereas harder German paints may show slightly less improvement. This package is perfect for giving your vehicle a refreshed look while staying within budget. It’s also ideal for newer vehicles, restoring the showroom finish that is often lacking from dealership deliveries.
We begin with the wheels, using a combination of wheel and tire brushes along with wheel cleaners and degreasers to clean the wheels, barrels, and arches. Then, we rinse each wheel to remove any loose dirt and grime.
We apply citrus pre-wash and snow foam to the entire vehicle to help remove dirt and reduce the risk of swirls and scratches. This is rinsed off with high-pressure water. Using the two-bucket method with Shampoo and a microfiber wash mitt, we wash the vehicle from top to bottom, rinsing the mitt after each panel. Finally, we use a Karcher K4 for a high-pressure rinse, effectively removing shampoo and dirt.
Decontamination is crucial for achieving a great finish. We use chemicals to remove tar, iron filings, and sap from your paintwork. First, we apply Tar to soften the tar, then agitate it with a soft microfiber cloth to remove stubborn spots. After rinsing, we apply a Iron remover to the painted surfaces and wheels, then rinse again. Finally, the vehicle is brought inside to be dried with blow dryers and drying towels.
Once the vehicle is prepped, we begin our two-stage paint enhancement by testing a small area to determine the most effective compound and pad for your vehicle. We use 1", 2", 3", and 5" pads to ensure every part of your vehicle is thoroughly covered, leaving no area untouched.
In our two stage correction, we start by going over the entire car with a heavy cutting compound to cut through those swirl marks and defects and then move onto refining to bring the clarity and depth back into your paintwork.
To complete the process, we will apply protection if required, this can either be a hard wax, spray sealant or one of our Supass Ceramic Coatings. We also apply tire dressing, treat exterior trims, and clean the glass inside and out. Before handing over the keys, we meticulously inspect all exterior surfaces to ensure they meet our standards of cleanliness.
